Analysis of budget savings for self-built houses in rural areas and self-supplied building materials using small brick making machines

Analysis of budget savings for self-built houses in rural areas and self-supplied building materials using small brick making machines

When building a house by yourself in rural areas, using a small brick-making machine to produce basic building materials such as bricks yourself is an effective strategy to control project costs and achieve budget savings. The savings potential stems primarily from reduced reliance on external supply chains and controllable raw material costs.

The core saving logic lies in alternative procurement and avoidance of intermediate links. Self-produced building materials can directly eliminate the material premium, dealer profits and long-distance transportation costs incurred by purchasing finished bricks from the market. Especially in areas far from commercial centers, transportation costs account for a high proportion of the final brick price. Self-production can reduce costs to the cost of basic raw materials such as cement and local sand and gravel. This cost is usually much lower than the price of finished products. At the same time, leftover materials or scraps generated during the production process can be reused on site, further reducing waste.

Savings are affected by multiple factors. The main variables include: the market price level of local finished bricks (the higher the price, the greater the savings), the scale and amount of bricks used in self-built houses, and the convenience and cost of obtaining raw materials such as local sand and gravel. Generally speaking, for a typical-sized rural house, the material cost savings from using home-produced bricks to construct non-load-bearing walls or ancillary buildings can be significant, often enough to cover or far exceed the initial investment in small brick-making equipment.

Non-economic factors need to be considered comprehensively. Achieving the above savings requires a corresponding investment of time and labor in raw material preparation, production and brick maintenance. At the same time, it is necessary to ensure that the correct raw material ratio and maintenance methods are mastered to ensure that the self-produced bricks meet the necessary strength and durability standards. It is recommended to start with small, non-critical parts of the building.

Overall, for rural self-construction projects that can organize basic production and have high commercial procurement costs of local building materials, the introduction of small brick-making machines is a pragmatic choice with good cost-saving potential. It gives builders greater control over the cost of core building materials, but its successful implementation relies on quality control of the production process and reasonable arrangements for time and costs.